Volume Creation
Create volumes in the RAID group. The procedure to create a volume is as follows:
1 Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volumes] screen appears.
2 In [Action], click [Create].
The [Create Volumes] screen appears.
3 Select "Automatic" or "Manual" for "RAID Group / TPP Selection".
4 Enter the name of the volume that is to be created in "Name", set the required items, and click the [Create]
button.
A confirmation screen appears.
5 Click the [OK] button.
The volume is created and the registration completion screen appears.
6 Click the [Done] button.
The screen returns to the [Volumes] screen.
Connection Setup
On the ETERNUS AF, perform information registration and host affinity creation for the server that is to be add-
ed. On the server, operations such as preparing drivers and performing a LUN check are required.
For details on connection related setting procedures, refer to "Configuration Guide (Basic)" or "Configuration
Guide (Web GUI)". Also refer to "Configuration Guide -Server Connection-" as required.
The procedure to create a host affinity is as follows:
•
Host group addition
•
CA port parameter settings
•
CA port group creation
•
LUN group addition
•
Host affinity creation
5. Component Expansion/Function Enhancement
Adding Servers
68
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
