13 Click the [Done] button.
The [Add Drive Enclosure] screen closes and the screen display returns to the [Drive Enclosure] screen.
14 In the [Storage] screen of [Component], check that the added drive enclosure is displayed.
15 Install the drives.
For details on drive installation, refer to "Additional Drive Installation Procedure" (page
49).
16 If a wrist strap is used, remove the wrist strap.
License Registration
■
Veeam Storage Integration License Registration (ETERNUS AF250 S2)
The following procedure explains how to register the Veeam Storage Integration license.
Registering the Veeam Storage Integration license to the storage system enables the Veeam Storage Integration
function.
•
A Veeam Storage Integration license is issued for each ETERNUS AF. The issued license cannot be registered
in another ETERNUS AF.
•
An Advanced Copy Feature license must be enabled to use Veeam Storage Integration.
For the procedure to obtain the Veeam Storage Integration license, refer to "Configuration Guide (Basic)".
5. Component Expansion/Function Enhancement
License Registration
61
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
