Required Information for Inquiries
Before contacting your maintenance engineer when trouble occurs, prepare the information that is shown be-
low. For details on the maintenance service, refer to "Maintenance Service" (page
73).
● The Model Name and the Serial Number of the ETERNUS AF
This information can be checked by using a device ID label, ETERNUS Web GUI, or ETERNUS CLI.
CLI> show enclosure-status
Storage System Name [ETERNUS AF250 S2]
Enclosure View
Serial Number [xxxxxx]
Model Name [ETxxxxxx]
:
Model name
Serial number
MODEL. ETxxxxx
SERIAL. xxxxxxxxxx
Model name
Ser
ial number
Device ID label
ETERNUS Web GUI screen
ETERNUS CLI (”show enclosure-status” command)
Output example for the ETERNUS AF250 S2
Model name - Serial number
● Details about the Trouble, Any Actions Taken, and the Results of These Actions
● The Devices That Are Connected to the
ETERNUS AF
•
The models of the server and network devices
•
The power synchronized unit model
•
The UPS model
● Log/Dump Information of the ETERNUS AF
When your maintenance engineer asks for the log/dump information of the ETERNUS AF, obtain the required
log/dump information using the log/dump collection function of ETERNUS Web GUI.
For details on obtaining the log/dump information, refer to "ETERNUS Web GUI User's Guide".
7. Troubleshooting
Required Information for Inquiries
83
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
