Fujitsu ETERNUS AF250 S2 - Figure 31 on Position (Marked |) of the Main Line Switches on a 2 U Power Distribution Unit; Figure 32 on Position of the Main Line Switches on a 2 U Power Distribution Unit

● For 2U
Figure 31 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
Figure 32 ON Position of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
■
To Switch to OFF
Turn the main line switch of the power distribution unit to the OFF position (marked "¡").
This does not need to be turned off for normal operation. If the ETERNUS AF must be turned off, such as be-
fore any inspections of power supply devices are performed, turn off the
ETERNUS AF by using the procedure
described in "Powering Off" (page 37), turn all the PSU switches of the power supply unit to the OFF posi-
tion, and turn the main line switch to the OFF position.
2. Basic Operation
Powering On and Off
31
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0