Fujitsu ETERNUS AF250 S2 - Basic Operation; Powering On and Off; Power Distribution Unit Switches

2. Basic Operation
This chapter explains how to turn on and off the ETERNUS AF and how to operate the FUNCTION button on the
controller enclosure.
Powering On and Off
This section explains how to turn on and off the ETERNUS AF.
Switching On and Off the Main Line Switch on the Power Distribution Unit (for Re-
gions other than the EMEIA, Central American, and Caribbean Regions)
This section explains how to switch the main line switch of the power distribution unit to ON and OFF.
For power distribution units, there are two different types of exteriors.
■
To Switch to ON
Turn the main line switch of the power distribution unit to the ON position (marked "|").
Make sure all of the main line switches are in the ON position.
● For 1U
Figure 29 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
Figure 30 ON Position of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
30
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0