Fujitsu ETERNUS AF250 S2 - Power Distribution Units (Regions); 1 U Power Distribution Units

Power Distribution Units (for Regions other than the EMEIA, Cen-
tral American, and Caribbean Regions)
There are two sizes for power distribution units: 1U and 2U.
Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
For power distribution units (AC200-240V, 1U, 4 Outlets)
, there are two different types of exteriors.
Figure 24 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
3
2
1
1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out-
put cable).
3. Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC input
cable).
Figure 25 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
3
2
1
1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out-
put cable).
3. Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC input
cable).
1. Component Names and LED Names
Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Regions)
27
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0