• Hold the drive with both hands to protect against jarring.
(3) Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4) Check that the newly installed drive's DRIVE READY LED lights up green.
5 To install more additional drives, repeat Step 3 and Step 4.
6 If a wrist strap is used, remove the wrist strap.
7 In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives have
been recognized.
8 Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
Installing Additional Drive Enclosures
Drive enclosures can be installed while the ETERNUS AF is running without affecting the system.
This section explains how to install drive enclosures in the ETERNUS AF
.
5. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
51
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
