11 Connect the DI (OUT) port of CM#1 in the controller enclosure to the DI (IN) port of IOM#1 in the drive
enclosure that is to be added with a mini SAS HD cable between enclosures.
The following figure shows how a mini SAS HD cable between enclosures (CE and DE) is connected when a
drive enclosure is added.
The LINK/FAULT LED for the DI (OUT) port of CM#1 and the FAULT LED for the DI (IN) port of IOM#1 blink on
and off.
Controller enclosure
D
rive enclosure
that is to be added
Controller 1
Connect here
Connect here
12 Click the [Next >>] button.
A screen that indicates the drive enclosure has been added appears.
5. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
60
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
