1 In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of the
ETERNUS AF are in normal status.
2 Display the [Add Drive Enclosure] screen.
(1) In the [Storage] screen of [Component], click [Add Drive Enclosure] in [Action].
The [Add Drive Enclosure] screen appears.
(2) Select which DE-ID to connect the additional drive enclosure to and the type of drive enclosure that is
to be added in "Target Drive Enclosure", and then click the [Next>>] button.
• Type
Select the type of drive enclosure that is to be added.
- 2.5" 24DE
2.5" type drive enclosure
5. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
54
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
