2 After the server has booted up, log in as a superuser, and use the "format" command to confirm that
the storage system and all the logical units have been correctly recognized.
# format
Example 1: VTOC disk labels
• Target ID=16, lun=0 and 1 of ETERNUS DX400 S2 series are connected to the physical path "/
pci@9,600000/lpfc@1", and c4t16d0 and c4t16d1 are assigned to each of these LUNs.
• Target ID=16, lun=0 and 1 of ETERNUS DX400 S2 series are connected to the physical path "/
pci@9,600000/lpfc@2", and c5t16d0 and c5t16d1 are assigned to each of these LUNs.
# format
Searching for disks...done
c4t16d0: configured with capacity of 7.98GB
c4t16d1: configured with capacity of 7.98GB
c5t16d0: configured with capacity of 7.98GB
c5t16d1: configured with capacity of 7.98GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf6851ce,0
1. c4t16d0 <FUJITSU-ETERNUS_DX400 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/lpfc@1/sd@10,0
2. c4t16d1 <FUJITSU-ETERNUS_DX400 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/lpfc@1/sd@10,1
3. c5t16d0 <FUJITSU-ETERNUS_DX400 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/lpfc@2/sd@10,0
4. c5t16d1 <FUJITSU-ETERNUS_DX400 cyl 1022 alt 2 hd 64 sec 256>
/pci@9,600000/lpfc@2/sd@10,1
Specify disk (enter its number):
Chapter 2
Setup Procedure for Emulex Fibre Channel Cards
2.4 Setting Up the Server to Recognize the Logical Units
39
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0
To Next Page
Loading...
