Fujitsu ETERNUS DX - Oracle Driver for Qlogic OEM Fibre Channel Cards

Procedure Supplier Fibre Channel card product ID
"1.3.2 Oracle Driver for Emulex OEM Fibre Channel
Cards" (page 13)
Fujitsu
•
SP1X7FBS2F
•
SP1X7FBR2F
•
SP1X7FBA2F
•
SP1X5FBS2F
•
SP1X5FBR2F
•
SP1X5FBA2F
•
XSEFC401AF
•
XSEFC402A
•
XSEFC401A
Oracle (Former Sun)
•
7101690
•
7101689
•
7101684
•
7101683
•
SG-XPCIE2FC-EM8-Z
•
SG-XPCIE1FC-EM8-Z
•
SG-XPCI2FC-EM4-Z
•
SG-XPCI1FC-EM4-Z
•
SG-XPCE2FC-EM4
•
SG-XPCE1FC-EM4
•
SG-XPCI2FC-EM2
•
SG-XPCI1FC-EM2
1.3.1 Oracle Driver for QLogic OEM Fibre Channel Cards
Oracle Driver for QLogic OEM Fibre Channel Cards
When connecting using QLogic OEM Fibre Channel cards with an Oracle Fibre Channel card driver, the config-
uration file will need to be edited as follows.
The "command queue depth" setting must be adjusted for both direct connection and switch connection. The
"command queue depth" setting is specified in the configuration file (/etc/system).
● For direct connection
Instance name data of the Fibre Channel card is necessary. Refer to the following sections to set.
•
"1.3.1.1 Creating a WWN Instance Management Table for the Server" (page 9)
•
"1.3.1.2 Setting the Configuration File (/etc/system)" (page 12)
● For switch connection
The Fibre Channel card Instance name, target WWN, and target ID information are necessary. Check each
item and enter them in the table. Edit the configuration file according to those information and make set-
tings. Refer to the following sections to set.
•
"1.3.1.1 Creating a WWN Instance Management Table for the Server" (page 9)
•
"1.3.1.2 Setting the Configuration File (/etc/system)" (page 12)
1.3.1.1 Creating a WWN Instance Management Table for the Server
Create a "WWN instance management table for the server" with information regarding the Fibre Channel card
installed in the server. For each Fibre Channel card that is installed in the server, check the physical slot
names, WWN, instance names, physical path names, and controller number of the target connected to the
Fibre Channel card and enter them in the "WWN instance management table for the server" (provided in
"Appendix A Various Management Table Templates" (page 82)).
Chapter 1
Operations When Using Oracle Fibre Channel Cards
1.3 Setting Up the Server
9
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0