7.1 Basic Specifications
fi-5530C Image Scanner Operator’s Guide 113
SCANNER SPECIFICATIONS
7
*1) For details, refer to "6 DOCUMENT SPECIFICATIONS FOR ADF" on page 101.
*2) The scanning speed is the maximum speed of the scanner hardware. Software processing
time such as data transfer time is added to the actual scanning time.
*3) The maximum stacking capacity varies according to the document thickness. For details,
refer to "6 DOCUMENT SPECIFICATIONS FOR ADF" on page 101.
*4) The Ultra SCSI and USB2.0/1.1 interfaces cannot be used at the same time.
*5) If you connect the scanner with USB 2.0, it its required that the USB port and the Hub
are compliant with USB 2.0. The scanning speed may slow down when connecting with
USB 1.1.
*6) “Image Processing Software Option” is an optional software for FUJITSU fi-series scan-
ners to perform advanced binarization processing using the “FUJITSU TWAIN 32”
scanner driver.
*7) By Using the Imprinter, a character string, such as the alphabet and numbers, can be
printed in the scanned document. It helps you to organize your documents by printing a
name, date, time or a serial number on the scanned document.
14 Options Imaging Processing
Software
(Note(*6))
fi-553PR Imprinter (Note(*7))
No.
Item Specification
To Next Page
Loading...
Need help?
General