54
3.1 Cleaning Materials and Locations requiring
Cleaning
■ Cleaning Materials
For details about the cleaning materials, contact the FUJITSU scanner dealer where you pur-
chased the scanner.
■ Locations and Cycle for Cleaning
The following table shows the standard cleaning cycle for each location.
Cleaning Materials Parts Number Remarks
Cleaner F1
(or isopropyl alcohol)
CA99501-0013 1 bottle
Moisten a cloth with this fluid and wipe the
scanner clean.
Lint-free dry cloth - Commercially available one
Part to clean Standard Cleaning Cycle
Pad ASSY Clean these parts after every 5,000 scans.
Pick roller
Feed rollers
Plastic rollers
Eject rollers
Sheet guides
Glass
Ultra sonic sensor
ATTENTION
The scanner must be cleaned more frequently if you scan any of the fol-
lowing type of sheets:
• Documents of coated paper
• Documents that are almost completely covered with printed text or graph-
ics
• Chemically treated documents such as carbonless paper
• Documents containing a large amount of calcium carbonate
• Documents written by pencil
• Documents on which the toner is not fused sufficiently
To Next Page
Loading...
Need help?
General