3
fi-5530C Image Scanner Operator’s Guide 53
Chapter 3
DAILY CARE
This chapter describes how to clean the scanner.
WARNING
The glass surface inside the ADF becomes hot during
the operation of the scanner. Before you start to clean
the inner parts of the scanner, disconnect the AC
adapter from the power outlet, and wait at least 15
minutes.
Do not turn off the scanner when you clean the Feed
and Eject Rollers.
3.1 Cleaning Materials and Locations requiring Cleaning ...................................... 54
3.2 Cleaning the ADF .................................................................................................. 55
To Next Page
Loading...
Need help?
General