28
2.1 Scanning double sided Documents
1. Load the documents on the ADF paper chute.
For details on how to load documents, refer to "1.2 Loading Documents on the ADF for
Scanning" on page 6.
2. Adjust the side guides to the width of the documents.
3. Start up ScandAll 21
From [Start] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll
21]. This starts up ScandAll 21.
4. Select fi-5530C.
From the [Scan] menu, click [Select Source…], then select "FUJITSU fi-5530Cdj" (for
details refer to page 10 ) and click the [Select] button.
Load the documents facing the ADF
paper chute.(face down)
A
Side guides
To Next Page
Loading...
Need help?
General