Fujitsu fi-5530C - Document Scanner User Manual

18
■ FUJITSU ISIS Scanner Driver
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi
series by using application software that complies with The ISIS standard.
The following describes the procedure with examples of QuickScan for ordinary scanning by using
this driver.
The procedure may vary depending on your application. If you use an application other than
QuickScan, please refer to its Guide or Help for further information.
1. Procedure for Basic Scanning Operation
1) Startup the application.
From the [Start] menu, select [Programs]-[QuickScan] and click [QuickScan].
2) Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
3) Select fi-5530C, then click the [OK] button.
4) Select [Scan] - [New Batch] on the menu bar.

Fujitsu fi-5530C - Document Scanner Specifications

General

Brand	Fujitsu
Model	fi-5530C - Document Scanner
Category	Scanner
Language	English