36
■ Using ScandAll 21
1. Load the documents on the ADF paper chute.
2. Start up ScandAll 21.
Select [Program] - [ScannerUtility for Microsoft Windows] - [ScandAll21] from the [Start]
menu. This will start up ScandAll 21.
3. From the [Scan] menu select [To Adobe PDF].
⇒ [TWAIN Driver] dialogbox appears.
4. Set the scan resolution, paper size, etc., and then click the [Scan] button.
5. To close the [TWAIN Driver] dialog box, click the [Close] button.
⇒ The scanned image is displayed.
To Next Page
Loading...
