64
5. Click the "Device Set" tab.
⇒ The following panel appears.
You can confirm the following information on this panel:
• Total number of scans
• Pad counter (approximate number of scans after resetting the pad counter)
• Pick roller counter (approximate number of scans after resetting the Pick roller counter)
• For Windows 95 / Windows NT 4.0
1. When turning on the power, check that the scanner is connected to your PC.
2. Right click the "FUJITSU Scanner Control Center" icon displayed in the task tray, then
select "Option".
3. Click "Device Setting" tab.
⇒ The following screen is displayed.
To Next Page
Loading...
Need help?
General