Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external d evices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
To ensure that your device works properly, o nly use the connection cable
supplied or o nly use a high-quality connection cable.
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and rear side of the device. The ports available on
your device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the ma inboard.
Headphone port, black (front
of device)
Headphones
Microphone port, black (front of device)
Microphoneport
Audio output (Line Ou t), light
green
AudiooutputLineout
Audio input (Line In), light blue
AudioinputLinein
Serial port, turquoise
Serialport
RJ45-LAN port
LANport
USB 2.0 - Universal Serial
Bus, type-A, black
USB 3.1 G en1 - Universal Serial Bus,
type-A: blue, type-C: black
UniversalSe
rialBus
DP DisplayPort
DisplayPort
PS/2 mouse port, green
MouseportPS/2mouse po rt
PS/2 keyboard port, purple
Keyboardport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Fujitsu 19
To Next Page
Loading...
