System expansions
Remove power supply
Board,
► Open the casing (see "Opening the ca sing", Page 31).
2
3
1
2
► Disconnect the cables from t he mainboard (1).
► Undo the screw s (2).
► Lift the power supply out of the casing (3).
You must reinstall the r ear slot cover plate for protection against fire and to
comply with the Electromagnetic Compatibility (EMC) Directive).
► Reinstall the rear slot cover plate (see "
Install ing the board" , Page 45).
► Close the casing (see "
Closing the ca sing", Page 52).
Make sure that the cables do not become trapped between the
casing and the compon ents!
50 Fujitsu
To Next Page
Loading...
