System expansio ns
Removing the loudspeak er
Loudspeaker
► Open the housing (see "Opening the casing", Page 31).
► If a PCIe board or power sup ply is installed, remove the cross piece and PCIe board or power
supply (see "
Removing the board", Page 47/"Remove power supply", Page 50).
2
2
1
► Disconnect the loudspeaker cable from the mainboard (1).
► Undo the screws ( 2).
► Lift the loudspeaker out of the casing and remo ve the two he xago n bolts.
► When required, reinstall the cross pie ce and PCIe board or power supply (see
"
Installing the board", Pa ge 45/"Install power supply", Page 49).
► Close the housing (see "
Closing the casing", Page 52).
Fujitsu 41
To Next Page
Loading...
