How to correct date and time on Fujitsu Laptop?
With the BIOS-Setup-Utility, you can set the date and time in the Main menu. Alternatively, please contact your sales outlet or our hotline/service desk.
What to do if SmartCard reader is not recognized on Fujitsu Laptop?
If the SmartCard reader on your Fujitsu Laptop is not recognized, make sure you have inserted your SmartCard into the SmartCard reader with the chip facing upwards.
What does 'Previous boot incomplete' mean on Fujitsu Laptop?
If you see the message 'Previous boot incomplete - Default configuration used' on your Fujitsu Laptop, default values have been set for certain settings because of an error which occurred in the previous system boot. Press the F1 function key when prompted to do so.
Why Fujitsu Laptop beeps every few seconds?
If your Fujitsu Laptop is beeping every few seconds, the battery is almost flat. Charge the battery.
General safety information to follow when working with the notebook.
Steps for unpacking and inspecting the device for any transport damage.
Instructions for connecting the notebook to a power source.
Procedure for powering on the notebook for the initial setup.
How to operate the notebook using its touchscreen capabilities.
Guide to using the included stylus for input and navigation.
Information about the optional docking station.
Summary of security features like locks, passwords, and biometrics.
Steps to set up BIOS and HDD passwords for system security.
How to enable or disable passwords for hard disk access.
How to access and start the BIOS setup utility.
General steps for resolving issues and contacting support.
Guide to restoring the system to its original factory state.
Instructions for creating system backups and recovery disks.
Steps to recover the system when the hard drive is accessible.
To Next Page
General