102 Options Guide RX300 S6
Expansion cards and BBU
Ê Secure the BBU 2 to the holder for the 2
nd
BBU using the 3 screws.
I For iBBU08: install the BBU on the holder according to the installation
on the air duct, see "Installing the iBBU08 for a SAS/SATA RAID
controller on the air duct" on page 97
Figure 81: Connecting BBU 2 to the controller
Ê Insert the holder for the 2
nd
BBU into the air duct.
To Next Page
Loading...
