Fujitsu PRIMERGY RX300 S6 - Page 80

80 Options Guide RX300 S6
Accessible drives and LSP/LSD
Ê Insert the USB drive into the drive module.
Ê Secure the drive with the 4 screws (M3x4).
Figure 57: Inserting the drive module
Ê Insert the drive module.
V CAUTION!
When you push back the USB drive module, take care that the SAS
backplane do not lay in front of the drive module. In this case you must
push back the backplane into the correct position before you push the
drive module in completely.