TX200 S5 Operating Manual 59
5 Installation and operation
V CAUTION!
Follow the safety instructions in chapter “Important notes” on page 27.
5.1 Access to the drives
5.1.1 Access to the accessible drives (floorstand model)
Figure 10: Removing the drive cover and snapping it into the hard disk drive cover
Ê Unlock the server (1).
Ê Remove the drive cover (2).
Ê Place the drive cover on the hard disk cover (3).
I Please note the following when operating with tape drives:
If the system is programmed to eject the media automatically, the acces-
sible drives must not be obstructed.
The drive cover is replaced and the server locked in the reverse order.
/
0
1
To Next Page
Loading...
