Fujitsu PRIMERGY TX200 S5

TX200 S5 Operating Manual 75
Installation and operation Configuring the serve
r
If you are using the ServerView Installation Manager, you can skip the following
section on how to configure the server and install the operating system.
Continue from section “Cleaning the server” on page 76.
5.4.4 Configuring the server and installing the operating
system without the ServerView Installation
Manager
Configure onboard SATA controller
Configure the controller as described in section “Configuring the onboard SATA
controller” on page 73.
Configure SAS/SATA RAID controller with "Integrated Mirroring
Enhanced"
Configure the controller as described in section “Configuring the onboard SATA
controller” on page 73.
Configure SAS/SATA RAID controller with "MegaRAID functionality"
Configure the controller as described in section “Configuring the onboard SATA
controller” on page 73.
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.