Fujitsu PSWITCH 2048T User Manual

FUJITSU PSWITCH User’s Guide
102 December/2018
3.1.5.3. Authentication
User can be authenticated based on:
 Login mode (login)
 Access to Privileged EXEC mode (enable)
 Switch access method (dot1x)
Each of the authentication types above takes a different set of the valid
authentication methods summarized in the following table.
Method
login
enable
dot1x
Description of the Method
enable
yes
yes
no
Use the enable password.
line
yes
yes
no
Use the line password.
local
yes
no
yes
Use the ID and password in the Local User Database.
none
yes
yes
yes
No authentication is used.
deny
no
yes
no
Access is denied.
radius
yes
yes
yes
Sends the user information to an AAA server to be
authenticated.
tacacs
yes
yes
no
ldap
yes
yes
no
ias
no
no
yes
Use internal 802.1X authentication server (ias).
Table 3-4: Authentication methods applicable for each authentication type
The switch has an internal 802.1X authentication server (ias) feature that enables
to separately create, maintain, and authenticate users for network (802.1X) access.
3.1.5.4. Password Management
The following configuration is available for the password management settings.
The minimum length required for user passwords can be defined. -
History of previous passwords can be kept to prevent similar password reuses. -
Password expiration timing can be defined to prompt user to change password. -
Lock out count can be define. If a user fails to enter the correct password within -
the count, that user is locked out from further remote switch access. The user
lockout feature is disabled by default.

Fujitsu PSWITCH 2048T Specifications

General

Brand	Fujitsu
Model	PSWITCH 2048T
Category	Switch
Language	English