Fujitsu PSWITCH 2048T - Transitions of Device Temperature

FUJITSU PSWITCH User’s Guide
176 December/2018
1 2 PSU-2 Removable Not present
Power Consumption:
Unit Power supply Current (mA) Voltage (mV) Watt (mW)
---- ------------ ------------ ------------ ------------
1 1 8758 11869 103948
1 2 0 0 0
Battery Status: GOOD
Please confirm that the Battery Status is “GOOD”.
4.7. Transitions of Device Temperature
In this product, the state of the internal temperature sensor is defined as follows.
When the state of the internal temperature sensor reaches the following state,
take measures as indicated in the “Action”column.
 You can refer the state of the internal temperature sensor by executing“show
environment”command on the CLI.
 The“temperatureStateChange”trap will be issued when the temperature
sensor’s state crosses the boundary of the state.