Fujitsu PSWITCH 2048T User Manual

FUJITSU PSWITCH User’s Guide
12 December/2018
FUJITSU PSWITCH 4032P
LED
LED Status
Condition
Fan tray LED
Solid Green
Fan powered on at expected rotates per minute
Solid Yellow
Fan failure
Power Supply
LED
Off
No power
Solid Green
Power is ok
Solid Yellow
Power supply critical event causing a shutdown; failure
Blinking Yellow
Power supply warning events where the power supply
continues to operate
Table 1-4: Rear LED status (FUJITSU PSWITCH 4032P)
1.4. System Specification
System Specification
Component
Specification
Switch fabric capacity
[FUJITSU PSWITCH 2048T/P]
Non-blocking full wire speed on all packet sizes
[FUJITSU PSWITCH 4032P]
1,428 Mpps
Forwarding architecture
Store and forward or cut-through
Port packet forwarding rate
(at 64 Bytes)
59,523,809 pps (40GbE).
14,880,952 pps (10GbE).
MAC address entries
supported
96K entries.
1,000,000 seconds programable.
Default 300 seconds.
Spanning Tree Support
Support IEEE802.1d STP.
Support IEEE802.1s MSTP.
Support IEEE802.1w RSTP.
Storm Control
Rate control based on packet / byte.
Unknown unicast (DLF) packet.
Broadcast packet.
Known & unknown L2MC packets.
Known & unknown IPMC packets.
Enable individual threshold per port.
Memory type
12 MBytes buffer memory

Fujitsu PSWITCH 2048T Specifications

General

Brand	Fujitsu
Model	PSWITCH 2048T
Category	Switch
Language	English