Fujitsu PSWITCH 2048T User Manual

FUJITSU PSWITCH User’s Guide
150 December/2018
Parameter name
Default value
Link aggregation
load balancing algorithm
Destination MAC address + Source MAC address +
VLAN ID + Ether type + Incoming port
LLDP
Disabled
Loop protection
Disabled
Broadcast / Multicast storm
control
Disabled
RADIUS client
Disabled
TACACS+ client
Disabled
LDAP client
Disabled
IP interface (IPv4)
Service port (oob): DHCP enabled.
Network port: DHCP disabled.
IP interfaces: DHCP disabled.
IP interface (IPv6)
Service port (oob): Only generate link-local address.
Network port: Only generate link-local address.
IP interfaces: Only generate link-local address
Management account
User name: admin
Password: n/a
DHCP client
Service Port (OOB): DHCPv4 Enabled. Other disabled.
DNS client
Domain Name Lookup: Enabled
Number of retries: 2 times
Retry timeout period: 3 seconds
LLMNR
Enabled
telnet/SSH auto logoff
5 minutes
Console auto logoff
5 minutes
System Log
System log transmission: Not supported
Facility
0(kern), 1(user), 2(mail), 3(daemon), 4(auth), 5(syslog),
6(lpr), 7(news), 8(uucp), 9(cron), 10(authpriv), 11(ftp),
12(ntp), 13(log audit), 14(log alert), 15(clock),
16(local0), 17(local1), 18(local2), 19(local3), 20(local4),
21(local5), 22(local6), 23(local7)
Priority
emergency(0), alert(1), cirtical(2), error(3), warn(4),
notice(5), info(6), debug(7)
Automatic time setting
Disabled
Terminal
Pager: Enabled
Prompt setting (admin/user):

Fujitsu PSWITCH 2048T Specifications

General

Brand	Fujitsu
Model	PSWITCH 2048T
Category	Switch
Language	English