Fujitsu S510 User Manual

110
4.6 About Automatic Interaction with Applications
ScanSnap Organizer and CardMinder can automatically interact with the ScanSnap upon startup.
There are two ways of interacting.
■ Automatic Interaction Mode (When to Interact)
(1) When any one of above applications is selected (active), the ScanSnap interacts
with it. (Default setting)
When ScanSnap Organizer or CardMinder becomes active, or, in other words, when one of
them is clicked on the taskbar and its window is brought to the front, a scanned document
image is displayed in the active application upon pressing the [SCAN] button.
In addition, when the ScanSnap is in Quick Menu Mode, either of the applications starts
interacting with the ScanSnap upon pressing the [SCAN] button, and a scanned document
image is displayed in the interacting application, instead of the ScanSnap Quick Menu being
displayed.
When the application becomes inactive or it is deselected, the ScanSnap no longer interacts
with the application.
Not interacting
Interacting

Fujitsu S510 Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Operating System Compatibility	Windows, macOS
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	CIS (Contact Image Sensor)
Maximum Resolution	600 dpi
Output Resolution	150, 200, 300, 400, 600 dpi