Fujitsu S510 User Manual

6.1 Using ScanSnap Manager
ScanSnap S510 Operator's Guide 179
Using the ScanSnap in Various Ways
6
■ Skipping blank pages
ScanSnap is able to recognize blank pages and remove them from the output data. When scanning
documents in "Duplex" mode, both sides of the documents are scanned regardless if their
backsides are printed or not. Though the empty back sides are scanned, they are recognized as
"blank" and automatically removed, so they will not appear on the output data.
To change the setting, follow the procedure below.
Operation
1. Right-click the ScanSnap Manager icon on the taskbar, and then select "SCAN
Button Settings" from the menu.
2. Select the [Scanning] tab and click the [Option] button.
S
S

Fujitsu S510 Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Operating System Compatibility	Windows, macOS
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	CIS (Contact Image Sensor)
Maximum Resolution	600 dpi
Output Resolution	150, 200, 300, 400, 600 dpi