Fujitsu S510 User Manual

10
■ Installing ABBYY FineReader for ScanSnap
Install ABBYY FineReader for ScanSnap by using the following procedure from the "ABBYY
FineReader CD" supplied with the ScanSnap.
Operation
Prepare the ABBYY FineReader CD-ROM.
1. Insert the "ABBYY FineReader CD" into the CD drive.
⇒ The "ABBYY FineReader for ScanSnap" screen appears.
ATTENTION
• If Windows XP Service Pack 2 is installed in your computer, you may see the
following dialog box when inserting the CD described above. Click the [Yes]
button to show the "ABBYY FineReader for ScanSnap" screen.
If the "In the future, do not show this message." checkbox is marked, you will
not see this dialog box when inserting a CD that attempts to connect to
Microsoft Internet Explorer in the future.
• You may see [Information Bar] instead of the message above. If so, first, click
the [OK] button and then the yellow part with a warning for options.
Next, select [Allow Blocked Content] from the menu.

Fujitsu S510 Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Operating System Compatibility	Windows, macOS
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	CIS (Contact Image Sensor)
Maximum Resolution	600 dpi
Output Resolution	150, 200, 300, 400, 600 dpi