Fujitsu S510 - Installing Adobe Acrobat

8
■ Installing Adobe Acrobat
Install Adobe Acrobat using the following procedure from the "Adobe Acrobat 8 CD-ROM"
supplied with the ScanSnap.
Operation
Prepare the Adobe Acrobat CD-ROM.
1. Insert the supplied "Adobe Acrobat 8 CD-ROM" into the CD drive.
⇒ The CD-ROM is automatically recognized and the "Adobe Acrobat Standard" window
appears.
ATTENTION
Adobe Acrobat can be used on the following operating systems:
• Windows 2000 (Service Pack 4 or later)
Windows XP (Service Pack 2 or later)
Other requirements:
• Internet Explorer 6.0 or later
• Screen Resolution: 1024 x 768 or higher
HINT
Adobe Acrobat is required for viewing the "ScanSnap S510 Operator’s
Guide," "ScanSnap Organizer User’s Guide," and "CardMinder User’s Guide."
Adobe Acrobat can also be linked to the ScanSnap for displaying the scanned
images in Adobe Acrobat.
* You do not have to install Adobe Acrobat if it is already installed on your
personal computer.
⇒ Proceed to "Installing ABBYY FineReader for ScanSnap" on page 10.
HINT
This window is not displayed automatically when the "AutoPlay" setting of your
computer is disabled. In this case, run "AutoPlay.exe" of this
CD-ROM directly
using the "Explore" or "My computer."