Fujitsu S510 User Manual

2.1 Installing the Supplied Programs
ScanSnap S510 Operator's Guide 7
Connecting the ScanSnap
2
■ RAM
For Windows 2000 and Windows XP:
128 MB or more
(256 MB or more is recommended.512 MB or more is recommended when you scan
documents while sellecting "Excellent" in the "Image quality" drop down list.)
For Windows Vista:
512 MB or more
■ Free disk space
• ScanSnap Manager 350 MB
• ScanSnap Organizer 370 MB
• CardMinder 200MB
• Adobe
Acrobat 670 MB
(plus 270 MB for file cache at installation)
• ABBYY FineReader for ScanSnap 270 MB
2. Make sure that the ScanSnap is not yet connected to your personal computer.
3. Start your personal computer.
Log on as a user with "Administrator" privileges.
4. Exit all programs and close all windows.
ATTENTION
• The ScanSnap may not function if it is connected to the USB port on the
keyboard or the monitor.
• If you are using a commercially available USB hub, use a powered hub
equipped with an AC adapter.
• To connect the ScanSnap with USB 2.0, it is required that the USB port and
the hub be compliant with USB 2.0. When you connect the ScanSnap with
USB 1.1 port, scanning speed may slow down. Therefore, use the USB 2.0
compatible one if your computer has the USB 2.0 compatible port.
• If the CPU and memory do not meet the required specifications, scanning
speed will slow down.

Fujitsu S510 Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Operating System Compatibility	Windows, macOS
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	CIS (Contact Image Sensor)
Maximum Resolution	600 dpi
Output Resolution	150, 200, 300, 400, 600 dpi