Fujitsu S510 User Manual

236
8.1 Cleaning Materials
Note 1: To purchase cleaning materials, contact a FUJITSU scanner dealer where you purchased
the scanner.
Note 2: Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of moistened cloths.
Note 3: Any lint-free cloth can be used.
Cleaning Materials Parts No. Remarks
Cleaner F1 PA03950-0352 1 bottle (100ml)
(*1)
Cleaning wipe PA03950-0419 1 pack (24 sheets) (*1)(*2)
Lint-free dry cloth Commercially available. (*3)
ATTENTION
• Never use paint thinner and other organic solvents.
• During the cleaning, prevent water or moisture from getting inside the scanner.
• It may take long before the cleaner vaporizes if a large quantity is used. When
cleaning the scanner parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.

Fujitsu S510 Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Operating System Compatibility	Windows, macOS
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	CIS (Contact Image Sensor)
Maximum Resolution	600 dpi
Output Resolution	150, 200, 300, 400, 600 dpi