8.2 Cleaning the Scanner Exterior
ScanSnap S510 Operator's Guide 237
Daily Care
8
8.2 Cleaning the Scanner Exterior
Clean the scanner exterior and the stacker with a cloth moistened with a small amount of Cleaner
F1 or any neutral detergent.
• During the cleaning, prevent water or moisture from getting inside the scanner.
• It may take long before the cleaner vaporizes if a large quantity is used. When
cleaning the scanner parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner
To Next Page
Loading...
