Fujitsu S510 User Manual

4
■ Operation Button
■ Rear View
SCAN
POWER
[SCAN] button
Press this button to start the scanning.
[POWER] button
Turns on/off the power.
Power indicator
Indicates the power status of the scanner.
Blue (Solid): Ready
Blue (Blinking): Scanning
Orange (Solid): Error
Light off: Power off
Seal (reminds you that the supplied software
has to be installed first)
After installing the software, remove this seal.
USB connector
AC adapter connector
Security cable slot
Plug a commercially
available security cable
into this slot (anti-theft).

Fujitsu S510 Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Operating System Compatibility	Windows, macOS
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	CIS (Contact Image Sensor)
Maximum Resolution	600 dpi
Output Resolution	150, 200, 300, 400, 600 dpi