148
[Properties] button
The print setup dialog box for the currently selected printer is displayed.
Note that the settings configured in the [Scan to Print] dialog box are given
higher priority over the settings for the currently selected printer.
Print options
You can change settings as follows:
Copies
You can specify the number of copies you want to print.
Select a number between 1 and 99.
Same size/Scaling down
You can select an output size of images; you can fit output images to paper
size or print them in original size.
Shrink to paper size:
Images larger than a paper size are scaled down to the paper size so that the
whole image can be printed on a sheet of paper. Images smaller than a page
size are printed in their actual sizes (same size).
Same size:
Images are printed in their original sizes.
[Allow automatic rotation] checkbox
Images are rotated according to the length-to-width ratio of images so that
they can be printed in either portrait orientation or landscape orientation,
whichever best fits.
[Center the image and print] checkbox
Images are centered and printed.
[Keep data used for printing as files] checkbox
PDF files are saved in a folder specified in the [Image saving folder] drop-down
list on the "[Save] tab" (page 75) of the "ScanSnap Manager - Scan and Save
Settings" dialog box.
[Do not show this dialog again] checkbox
You will not see the preview window from the next time.
You can skip step 7.
[Print] button
Clicking this button prints images using settings configured in this dialog box.
[Cancel] button
Clicking this button cancels all changes made in this dialog box and returns you to
the previous window (the ScanSnap Quick Menu Mode).
[Help] button
You can view Help topics related to the preview window.
To Next Page
Loading...
