Fujitsu S510 User Manual

4.2 Changing Scanning Settings
ScanSnap S510 Operator's Guide 69
Setting the ScanSnap
4
<Setting Items>
Each setting item is described below.
Settings you can change for scanning in Quick Menu Mode differ from those in Left-Click
Menu Mode.
For your convenience, each item is marked with a following symbol:
: Items that can be set in Quick Menu Mode
: Items that can be set in Left-Click Menu Mode
* Items with no mark can be changed in both modes.
Select a profile:
You can switch between profiles configured beforehand by selecting a profile in the "Select a
profile" drop-down list.
By default, the following profiles are in the list.
• Standard
• CardMinder (Only in CardMinder installed case)
• Searchable PDF
• Scan to Folder
• Scan to E-mail
• Scan to Print
• Scan to Word (Only in ABBYY Fine Reader for ScanSnap installed case)
• Scan to Excel (Only in ABBYY Fine Reader for ScanSnap installed case)
• Scan to PowerPoint(R) (Only in ABBYY Fine Reader for ScanSnap installed case)

Fujitsu S510 Specifications

General

Scanner Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Operating System Compatibility	Windows, macOS
Supported Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	CIS (Contact Image Sensor)
Maximum Resolution	600 dpi
Output Resolution	150, 200, 300, 400, 600 dpi