Fujitsu ScanSnap SV600

Scanning a Book
1. Press the [Scan] or [Stop] button on the ScanSnap to turn the power on.
[Scan] Button
[Stop] Button
a The power LED lights up in blue.
In addition, the ScanSnap Manager icon in the Dock changes from to .
2. Place the Background Pad on the front side of the ScanSnap.
Place the Background Pad so that it is in contact with the ScanSnap.
3. Place a book in the scan area of the ScanSnap and press the [Scan] button.
For details, refer to "How to Place Documents" (page 53).
HINT
You can also enable page turning detection by holding down the [Scan] button on the ScanSnap
for 2 seconds or longer. When page turning detection is used, turning a book's page
automatically starts scanning.
For details, refer to "Scanning Documents Using Page Turning Detection" (page 78).
Scanning a Book
23