ScanSnap Manager Icon
When ScanSnap Manager is running, the ScanSnap Manager icon is displayed in the Dock.
The ScanSnap Manager icon indicates whether or not ScanSnap Manager is successfully
communicating with the ScanSnap. The appearance of the icon changes according to the
communication status as shown below.
Communication Status ScanSnap Manager Icon
Communicating
Not communicating
HINT
l Turn the ScanSnap on to begin communication between ScanSnap Manager and the ScanSnap.
For details about how to turn on the ScanSnap, refer to "Turning the ScanSnap On" (page 47).
l When two ScanSnaps are connected to a computer and both of them are communicating with
ScanSnap Manager, the following ScanSnap Manager icon is displayed.
For details, refer to "Scanning Documents with Two ScanSnaps Connected to a Computer" (page
85).
You can display the menu for scanning documents and ScanSnap Manager settings from the
ScanSnap Manager icon.
l Clicking while holding down the [control] key on the keyboard
Displays the "ScanSnap Manager Menu" (page 41).
l Clicking
Displays the Profile menu.
For details, refer to the Advanced Operation Guide.
ScanSnap Manager Icon
40
To Next Page
Loading...
