Fujitsu ScanSnap SV600

System Requirements
The ScanSnap has the following system requirements.
For the latest information on requirements, please visit the ScanSnap Support Site at:
http://scansnap.fujitsu.com/g-support/en/
Operating system (*1) OS X v10.10
OS X v10.9 (recommended: 10.9.5 or later)
OS X v10.8 (recommended: 10.8.5 or later)
Mac OS X v10.7 (recommended: 10.7.5 or later)
CPU
Intel
®
Core
™
i5 2.5 GHz or higher
Memory 4 GB or more
Display resolution 1024 × 768 pixels or higher
Disk space Free space required to install the software related to the ScanSnap is as follows:
(*2)
l ScanSnap Manager: 640 MB
l ScanSnap Organizer: 100 MB
l CardMinder: 600 MB
l ABBYY FineReader for ScanSnap: 590 MB
l ScanSnap Online Update: 10 MB
l ScanSnap SV600 Basic Operation Guide: 100 MB
l Nuance PDF Converter for Mac: 110 MB
USB port USB 3.0 (*3)/USB 2.0/USB 1.1
*1: Updating Mac OS to the latest version is recommended.
*2: To save scanned images, more free space is required.
For details about estimated image data size, refer to the ScanSnap Manager Help.
*3: Even if you connect the ScanSnap to a USB 3.0 compatible port, the scanner operates as a USB
2.0 device.
ATTENTION
l If the system requirements above are not satisfied, the ScanSnap may not operate.
l If a USB port on the keyboard or on the monitor is in use, the ScanSnap may not operate.
l When using a commercially available USB hub, use a type that is powered from an electrical power
supply (and that comes with an adapter).
l Scanning speed decreases in the following cases:
- The CPU or the memory does not meet the recommended specifications.
- The version of the USB port or the USB hub is USB 1.1.
l To scan a document, a disk space that is approximately three times larger than the size of the file
to be saved is required.
System Requirements
37