Fujitsu ScanSnap SV600

Scanning Multiple Documents at Once
1. Press the [Scan] or [Stop] button on the ScanSnap to turn the power on.
[Scan] Button
[Stop] Button
a The power LED lights up in blue.
In addition, the ScanSnap Manager icon in the Dock changes from to .
2. Place the Background Pad on the front side of the ScanSnap.
Place the Background Pad so that it is in contact with the ScanSnap.
3. Place a document in the scan area of the ScanSnap and press the [Scan]
button.
For details, refer to "How to Place Documents" (page 53).
Scanning Multiple Documents at Once
28