20
Initial Setups
EN
This unit can receive the Hyper and Oscar
frequency bands.
7 Move to the Decoder Setting section
using [Cursor ], and change the
setting using [Cursor
/ ].
• If you select “On”, Scrambled image will be
decoded when connected to a decoder.
8 Move to the Skip Setting section
using [Cursor ]. If the setting is
“On”, change it to “Off” using
[Cursor
/ ].
• If you select “On”, the channel will be skipped
when you change channels using
[PROG. / ].
9 When the setup for the position is
completed, press [ENTER].
• To set another channel, repeat steps 5 to 9.
10
Press [SETUP] to exit.
• “Station” (station name) will be detected and
assigned automatically. It cannot be selected.
To select a channel
Notes on using [the Number buttons]:
• Enter channel numbers as a two-digit number for
the quickest result. For example, to select channel
6, press [0] and [6]. If you only press [6], channel 6
will be selected after 2 seconds. You can only select
channels 1 to 99.
About an external input:
• You can select the external input mode “AV1”, “AV2”
or “AV3” using [INPUT SELECT] or [PROG. / ].
• You cannot change the channel when either HDD or
DVD is in any recording mode (normal recording,
One-touch Timer Recording or Timer Recording).
Move
You can replace two channels.
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Initial Setting” using
[Cursor
/ ], then press [ENTER].
3 Select “Channel Setting” using
[Cursor
/ ], then press [ENTER].
4 Select “Move” using [Cursor / ],
then press [ENTER].
Channel Plan
CH Indication TV Channel
01 – 10 IRA-IRJ, GAP
21 – 69 E21 – E69
74 – 78 X, Y, Z, Z+1, Z+2
80 – 99, 100 S1 – S20, GAP
121 – 141 S21 – S41
Setup Menu
10/04/06(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
Initial Setting
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
10/04/06(Mon) 19:34
10/04/06(Mon) 19:34
Initial Setting
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
Auto Tuning
Manual Tuning
Move
E2B21BD_E2B28BD_EN.book Page 20 Monday, August 21, 2006 5:05 PM
To Next Page
Loading...
