FUNAI HD-B2735 - Setting Disc Protection

43
Recording
EN
Setting disc protection
You can protect a disc from the accidental overwriting,
editing or erasing.
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Disc Management” using
[Cursor
/ ], then press [ENTER].
3 Select “DVD Disc Control” using
[Cursor
/ ], then press [ENTER].
4 Select “Disc Protect” using
[Cursor
/ ], then press [ENTER].
• If the disc has already been protected, “Disc
Undo Protect” will be listed in the menu instead
of “Disc Protect”.
5 Select “Yes” using [Cursor / ],
then press [ENTER].
The disc is protected.
• The default setting is “No”.
6 Press [SETUP] to exit.
Note
• Disc Protect is available only for VR mode DVDs.
DVD-RWDVD-RW
VR
Setup Menu
10/04/06(Mon) 19:34
Disc Management
EditingEditing
DubbingDubbing
Timer ProgrammeTimer Programme
Title ListTitle List
Initial SettingInitial Setting
Digital Audio SettingDigital Audio Setting
PlaybackPlayback
RecordingRecording
DisplayDisplay
HDD Initialise
10/04/06(Mon) 19:34
Disc Management
DVD Format
DVD Disc Control
HDD Initialise
DVD Format
10/04/06(Mon) 19:34
Disc Management
Finalise
DVD Disc Control
Auto Finalise
Disc Protect
HDD Initialise
DVD Format
10/04/06(Mon) 19:34
Disc Management
Finalise
DVD Disc Control
Auto Finalise
Disc Protect
Protect the disc.
OK to proceed?
Protect the disc.
OK to proceed?
No
Yes
E2B21BD_E2B28BD_EN.book Page 43 Monday, August 21, 2006 5:05 PM