42
Recording
EN
5 Select “Yes” using [Cursor / ],
then press [ENTER].
• If the disc has already been finalised, “Undo
Finalise” will be listed in the menu instead of
“Finalise” (DVD-RW only). To Undo the
finalisation of the disc, select “Undo Finalise”
and press [ENTER].
Finalising will start.
• This operation may take awhile to be completed.
Note
• You cannot cancel finalising the disc once it has
started.
Auto Finalise
You can finalise discs automatically when the disc
space runs out if you set this in the Setup Menu.
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Disc Management” using
[Cursor
/ ], then press [ENTER].
3 Select “DVD Disc Control” using
[Cursor
/ ], then press [ENTER].
4 Select “Auto Finalise” using
[Cursor
/ ], then press [ENTER].
5 Select “On” using [Cursor / ],
then press [ENTER].
The unit automatically finalises the disc when the
disc space runs out.
Your setting is activated.
• The default setting is “Off”
6 Press [SETUP] to exit.
Note
• Auto Finalise is not available while the Setup Menu
is displayed.
HDD Initialise
DVD Format
10/04/06(Mon) 19:34
Disc Management
Auto FinaliseAuto Finalise
Disc ProtectDisc Protect
Finalise
DVD Disc Control
Finalise the disc.
OK to proceed?
Finalise the disc.
OK to proceed?
No
Yes
DVD-RWDVD-RW
VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Setup Menu
10/04/06(Mon) 19:34
Disc Management
EditingEditing
DubbingDubbing
Timer ProgrammeTimer Programme
Title ListTitle List
Initial SettingInitial Setting
Digital Audio SettingDigital Audio Setting
PlaybackPlayback
RecordingRecording
DisplayDisplay
HDD Initialise
DVD Format
10/04/06(Mon) 19:34
Disc Management
Disc Protect
Finalise
DVD Disc Control
Auto Finalise
HDD Initialise
DVD Format
10/04/06(Mon) 19:34
Disc Management
Disc Protect
Finalise
DVD Disc Control
Auto Finalise
Auto FinaliseAuto Finalise
Off
On
E2B21BD_E2B28BD_EN.book Page 42 Monday, August 21, 2006 5:05 PM
To Next Page
Loading...
