2. HANDSET OPERATIONS
2-22
2.3.6 How to use Sent messages
Messages in the Sent box can be edited and re-sent. You can also use sent messages
to telephone the sender of a message, add a sender to Contacts and copy text of a
message.
How to edit and send a message
Messages in the Sent box can be edited and sent to the same or different recipient.
1. Open the Sent box and open the message.
2. Press the key to open the sub menu.
3. Press 1 to select [Copy & edit]. The [Create SMS] screen appears with the original
message text in the [Body] field. To edit and send a message to the original recip-
ient, go to step 6. To send the message to a different recipient go to step 4.
4. To send the message to a different recipient, with [To] selected, press the Enter
key.
5. Select the recipient. See paragraph 2.3.2.
6. Press T to select the [Body] field, and press the Enter key.
7. Edit the body text (maximum 160 characters) and press the Enter key.
8. Press the key to open the submenu.
9. Press 1 to select [Send] to send the message.
10. Press the key to close the box.
How to resend messages
You can resend a message that was already sent.
1. Open the Sent box and open the message.
2. Press the key to open the submenu.
3. Press 2 to select [Resend] to resend the message.
4. Press the key to close the box.
To Next Page
Loading...
Need help?
General
