EasyManuals Logo

Furuno FELCOM 250 User Manual

Furuno FELCOM 250
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
3. SETTINGS FOR HANDSET
3-2
How to set the ring pattern
1. In the [Sound] menu, press either the 1, 2, 3, or 4 key for the following:
1: External phone incoming notification pattern
2: Internal phone incoming notification pattern
3: SMS message notification pattern
4: System message notification pattern
2. Press 2 to select [Pattern] to show the pattern selection
screen.
3. Press S or T to select the pattern.
Note: Press the key to play the pattern at the select-
ed pattern. Press S or T to adjust the volume, from 1 - 7
and off.Press the key to stop.
4. Press the Enter key.
5. Press the key to close the menu.
3.1.2 How to adjust keypad tones volume
To adjust the volume for the keypad tones, do the following:
1. In the [Sound] menu, press 5 to select [Keypad tones].
2. Press S or T to select the volume level.
3. Press the Enter key.
4. Press the key to close the menu.
3.1.3 How to adjust the volume for the microphone
1. Press 6 to select [MIC volume] from the [Sound] menu
to show the MIC volume setting window.
2. Press S to increase the volume, or T to decrease the
volume (setting range: 1 to 7).
3. Press the Enter key.
4. Press the key to close the menu.

Table of Contents

Other manuals for Furuno FELCOM 250

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furuno FELCOM 250 and is the answer not in the manual?

Furuno FELCOM 250 Specifications

General IconGeneral
BrandFuruno
ModelFELCOM 250
CategoryMarine GPS System
LanguageEnglish

Related product manuals