3. SETTINGS FOR HANDSET
3-6
3.3 SMS Settings
You can change your signature and password settings in the [SMS Settings] menu.
1. At the idle screen, press the Enter key to open the main menu.
2. Press S to select the [SMS] icon and press the Enter key to show the [SMS]
screen.
Note: The [SMS] menu can also be opened by pressing the key at the idle
screen.
3. Press 6 to select [Settings] to open the [SMS settings] menu.
3.3.1 How to set an SMS Signature
An SMS signature is a line of text that is added to the end of all outgoing messages.
To add a signature to all outgoing messages, do the following:
1. In the [SMS Settings] menu, press 1 to select [Signature].
2. Press S or T to select [ON] or [OFF] and press the Enter key.
[ON]: A signature is automatically added to all SMS messages (go to step 3).
[OFF]: A signature is not automatically added to SMS messages (go to step 4).
3. Enter the signature text (maximum 156 characters) and press the Enter key. For
example, if “FURUNO” is entered as the signature, the sent message looks like
the one shown below.
4. Press the key to close the menu.
Signature
appears after
message text
XXXXXXXXXXXXXX
To Next Page
Loading...
Need help?
General
